tripoli016 海外项目英语口语(英文文本+MP3)：安全工程师面试(十六)

2021年1月13日发(作者：吴辰君)
Job interview for Safety Engineer
(Section 16)
第一部分：文本
1、Question: Explain the general risk assessment?
Answer:
* Identify all significant hazards and risks arising
from or connected with the activity to be carried out.
* Identify all the persons at risk including employees,
other workers and members of the public.
* Evaluate the adequacy and effectiveness of existing
control measures.
* Identify other protective measures that may be
required enable priorities to set.

2. Question: Identify four types of emergency procedure?
Answer:
* Evacuation in case of fire
* For accidents
* For dangerous occurrences such as chemical spillage
* For a security or intruder alert and in the event
of an explosive device being discovered on site.
3. Question: Identify the control measure to reduce the risk
to workers?
Answer:
* The detection of underground services by using plans
or cable/pipe detectors
* Supporting the sides of the excavation by shoring
or benching.
* Storing materials and spoil away from edge of the
excavation.
* Providing means to prevent vehicles falling into the
excavation such as stop blocks.
* Providing guardrails and barriers to prevent people
falling into the excavation.
* Providing means of support for adjacent structures
to prevent collapse
* Providing safe means of access/egress into the
excavation.
* Testing for noxious fumes and providing ventilation
if necessary.
* Using pumps to protect against flooding
* Taking precautions to safeguard the workers from
biological hazards
* Those caused by the presence of contaminated ground
* Arranging for the excavation to be inspected at
regular intervals by a competent person
4. Question: Explain the difference between consulting and
informing workers issues?
Answer:
* Consulting is a two way process where the employer
would involve, listen to and take on board the views and
suggestions of their employees before decisions are taken
* Informing is a one way process where the employer
would simply supply the information to their employees
regarding such matters as hazards, risks and control measures.

5. Question: What are the key elements of risk assessment
process?
Answer:
* The first stage is to consider the activities that
are being undertaken at the workplace and to identify the
significant hazards involved.
* Second stage is to identify those exposed to the
hazards such as operators, maintenance staff, cleaners and
visitors and noting in particular groups who might be
especially at risk such as young or workers with disabilities.