cinderella怎么读生产设备管理制度方案(中英文)

2021年1月21日发(作者：thorough)
公司设备管理制度

Infrastructure control procedure
1
目的
：为确定、提供并维护所需的基础设施，满足产品符合 性、环境管理和
职业健康安全管理的需要。为设备的维护保养、检修、完好提供依据。

1
Purpose:
Supply
evidence
to
equipment
’
s
maintenance,
examination
and
repair.
Meet
the
requirements
of
product
conformity,
environmental
management and occupational safety management.
2
范围：< br>适用于公司设备的新增、使用、保养、检修、封存、报废及设备档案
管理。

2
Scope:
It
can
be
used
for
factory
’
s
new
equipment,
using,
maintaining,
examining
and
repairing,
sealing,
discarding
and
equipment
dossier
management.
3
职责：

3 Responsibility
3.1
机动部负责全 部固定资产存档、相关资料文件的传递，并且负责组织固定
资产验收等日常管理工作，监督固定资产使用 、保养情况，建立健全固定资产
台账。固定资产管理具体执行《固定资产管理制度》
。

3.2
各部门、车间对本部门、车间的基础设施进行维护和管理。

3.1 Machinery power department is responsible for all files of fixed
assets,
transmit
of
relevant
documents
and
daily
management
like
examination
of
fixed
assets,
monitoring
of
its
application
and
maintenance.
The
management
of
fixed
assets
shall
be
in
accordance
with
Fixed Assets Management System
.
3.2
Each
department
and
workshop
shall
take
responsibility
of
the
maintenance and management of their infrastructure.
4
程序内容：

4 Procedure
4.1
基础设施的配置和验收

4.1 The allocation and acceptance check of infrastructure
4.1.1
依据产品实现需要配置相应的基础设施，并按照《
固定资产管理制度
》
中新增固定资产、更新改造固定资产要求填写《
新增固定资产申请表
》
、
《
固定
资产更新改造申请单
》
，
经授权人审报后购置设施设 备。
融资租入资产填写
《
经
营、租赁租入固定资产单
》
。< br>
4.1.1 In accordance with the requirements about new and update fixed
assets
in
Fixed
Assets
Management
System,

fill
Equipment
Purchase
Apply
List
,
Fixed
assets
renewal
application
form
based
on
production
realization.
Authorized
person
shall
purchase
equipment
after
the
application of purchasing facilities is approved. For the financing
lease, fill in
Business,
Lease and Rent of Fixed Assets List.

4.1.2
采购的设备由各部门按照《固定资产管理制度》中固定资产验收要求实
施 进厂验收、安装验收，并保存《
固定资产验收单
》
。固定资产验收不合格填写
《
固定资产验收（整

改）通知单》
，整改合格后重新验收。

4.1.2 Each department shall check the fixed assets that enter into the
factory. The acceptance shall strictly follow
Fixed Assets Management
System
. The Acceptance List of Fixed Assets shall be kept. For the
non- conformances,
Acceptance (Rectification) Notice of Fixed Assets

shall be filled. Reaccept after rectification.
4.2
设备的完好检查

4.2 Inspection of equipment
4.2.1
生产设备管理员每个季度都要对在用设备进行完好检查，并编制填写
《
设
备完好评定表
》
，如果设备评定完好则挂“完好 ”标牌，否则挂“待修”标牌并
及时维修。生产设备管理员在进行完好检查时必须遵循以下标准：

1
）传动正常，变速齐全。

2
）系统灵敏可靠，滑动部位正常，安全防护正常。

3
）需要润滑的设备部位应处于润滑状态。

4
）电气系统装置齐全，安全可靠，性能灵敏。

5
）设备内外清洁，无油污，无生锈。

6
）制动限位灵敏安全可靠。

7
）如果设备满足以上条件（具体设备具体分析）才可悬挂完好标志牌。

4.2.1
Production
equipment
administrator
should
inspect
equipment
every
three
months
and
comply
and
fill
in
Intact
Equipment
Bill
.
If
the
equipment runs completely, hanging up Intact Brand. Or, hanging up For
Repairing
Brand
and
maintain
in
time.
Production
equipment
administrator
should
be
accorded
this
following
standard
when
running
on
Intact
Inspection.
1)

Transmission in normal and variable speed is complete.
2)

The
system
is
flexible
and
reliable;
sliding
parts
and
safety
protection are normal.
3)

The lubricative equipment parts are on the state of lubrication.
4) Electrical system setting are compete, safe reliable and flexible
performance.
5) Inner equipment is clean, no greasy dirt and rust.
6) Brake spacing is flexible, safe and reliable.
7) If equipment accords with the above condition (specific equipment
should be specific analysis), hanging up Intact Brand.
4.2.2
设备完好检查流程

设备主管、管理员、维修工、车间主任确认设 备，设备待修挂待修牌，安
排维修；设备完好，挂完好牌并填写《设备完好评定表》
；根据评定 表对设备完
好率进行考核，填写《
车间设备完好率统计表
》
，设备主管审核， 车间保存。

4.2.2 The procedures of equipment inspection
The equipment should be checked and affirmed by equipment manager,
administrator,
maintenance
worker
and
workhouse
director.
If
the
equipment
should
be
repaired,
hanging
up
for
repairing
brand
and
arranging
for
repair;
if
the
equipment
is
intact,
hanging
up
for
intact
brand
and
filling
Intact
Equipment
Evaluation
List
;
equipment
administrator
reviews
the
intact
equipment
according
to
the
List
,
filling
in
the
Statistical
Chart
of
Equipment
Intactness

which
reviewed
by equipment manager and then saved by workshop.
4.3
设备的使用

4.3 The use of equipment
4.3.1
操作者必须严格按照相关规程操作。

4.3.1 Operator should be operated according to related rules.
4.3.2
重要设备开机交班时要进行日常点检，做《
点检记录
》
。

4.3.2
When
shifting,
the
important
equipment
should
be
checked
and
then
fill
Checking Record
.
4.3.3
点检设备发现异常时要通知 车间主任。由车间主任通知有关人员修理，
并由维修人员做好维修记录。

4.3.3
When
checking
equipment
fids
out
abnormal,
forming
workhouse
director immediately. Workhouse director will form related person to
repair and repairer fills
Maintaining Record
.
4.3.4
设备日 常保养标准：
1
清洁、
2
润滑、
3
调整、
4
紧固。

4.3.4
Equipment
Daily
Maintenance
Standard:
Clean,
Lubricative,
Adjusting and Fastening.
4.3.5
具体要求：
1
、工具入箱。
2
设备内外整洁，垃圾垃圾清 理及时。

4.3.5 Specific demand: tools keep in tool case; inside and outside of
equipment should be clean and handle with rubbish in time.
4.3.6
设备点检流程

设备管理员制定《
设备润滑表》和《电气 设备检查记录表
》
，操作者按照要
求检查签字，设备管理员月底收回签字，车间存档。

4.3.6 Equipment checking procedure
Equipment
administrator
drafts
Equipment
Lubrication
Chart

and
Electrical Equipment Inspection Record
. The operator shall check the
signature on them as required. Equipment administrator shall recollect
the signed record and keep them in file by the end of the month.

4.4
设备的保养

4.4 Equipment maintenance
4.4.1
维护周期：根据设备性能制定，为大型关键设备每月保养 一次（日常润
滑、
擦拭、
清理卫生操作工完成）
，
对一般工序设备根 据实际情况在一至三个月
内维护保养一次
,
如焊机内部除尘等，
参加维护保养 人员由设备操作工和维修人
员共同执行完成。参加月度维护的人员：设备责任人、维修工。

4.4.1 Maintenance period: According to equipment performance draws up
maintenance
period.
Large
key
equipment
should
be
maintained
once
a
month
(lubricative, clean and wipe by operator). Other equipment should be
maintained
every
one
or
three
month
according
to
actually
condition,
such
as
cleaning
up
dirt
inside
of
welding
machine.
This
work
will
be
carried
on by maintenance worker and equipment operator. Maintenance staff:
equipment responsible worker and maintenance worker.
4.4.2
维护内容：

4.4.2 Maintenance content:
1
）拆卸特定的部件、箱盖、防护罩等，彻底清扫和擦拭设备内外。

1)
Dismounting
specific
parts,
cover
and
shield
and
so
on,
clean
and
wipe
inside and outside of equipment.
2
）调整各部件配合间隙检查油位、油路是否畅通。螺栓是否松 动，零部件是否
缺损，如果损坏应及时更换。

2)
Adjusting
all
parts
coordinates
with
gap
oil
level
checking,
oil-way
is unblocked or not, bolts become less crowded or not, parts are defect